Licensed & Insured, in Los Angeles and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Los Angeles
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (213) 325-2806 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Los Angeles and surrounding areas · On-site visits included · Free estimate within 24h
Los Angeles Metal Roofing is a team of local certified professionals based in Los Angeles. We respond quickly in Los Angeles and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (213) 325-2806⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews
“We needed a metal roof on our barn out in the valley and these guys knocked it out in two days. The corrugated panels are straight as an arrow and they cleaned up every last screw off the ground. Our horses are back in there happy.”
Agricultural Metal Roofing
“We were dreading tearing off the old shingles on our 1920s craftsman, but they did the retrofit right over the top and the house looks brand new. The crew of four was respectful of the old wood trim and finished in three days flat.”
Metal Roof Over Shingles (Retrofit)
“Had them put a standing seam roof on my shop building and it came out great. Only reason I'm not giving five stars is they showed up a day late on the first day, but the work itself is solid and the price was fair.”
Commercial Metal Roofing
“Just had our whole house done in standing seam and I can't stop looking at it from the street. They walked me through the color options and the finished roof is exactly what I pictured. Crew was in and out in four days and the yard was spotless.”
Standing Seam Metal Roofing
“Water was pouring in around our chimney every time it rained and two other roofers just wanted to sell us a whole new roof. These guys found the failed flashing, fixed it properly, and charged a fraction of what I expected. Bone dry through the last storm.”
Chimney & Skylight Repair
“Called them out for an inspection after some wind damage and they spent over an hour on the roof and gave me a detailed report with photos. Turns out I just needed a few screws re-fastened, no upselling at all. Honest folks.”
Metal Roof Inspection
“Our place sits up on a hill and the metal roof had been leaking near the valley for years. They tracked down the source, replaced the bad panels and flashing, and it's been solid through two big rainstorms since. Genuinely relieved.”
Metal Roof Repair
“They installed new gutters matched to our metal roof and it made a huge difference with the runoff. The crew was friendly but left a few metal shavings in the driveway I had to sweep up myself. Overall a good job though.”
Gutters for Metal RoofsReal photos of our work in Los Angeles · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam metal roof installation | Starting at $12/sq ft | Includes concealed fasteners, high-temp underlayment and full flashing; roof complexity and pitch raise the rate. |
| Exposed fastener panel roof installation | Starting at $8/sq ft | Includes corrugated or ribbed panels, underlayment and trim; tear-off and deck repair add cost. |
| Stone-coated steel or metal shingle installation | Starting at $11/sq ft | Includes panel system and trim; historic or HOA design review and steep pitch move the number. |
| Metal roof over shingles (retrofit) | Starting at $9/sq ft | Includes battens and new underlayment over one existing layer; code limits and deck condition apply. |
| Complex or large-scale job | On estimate | Hillside access, multiple valleys, skylights and chimneys need an on-site look before a number. |
| Estimate | Free | Response within 24 hours at (213) 325-2806, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Concealed-fastener panels, underlayment and standard flashing included; roof complexity and access move the price. |
| Mechanically seamed standing seam | Starting at $14/sq ft | Double-lock seamed panels for high-wind hillside and canyon homes; panel gauge and seam height affect the rate. |
| Architectural standing seam | Starting at $16/sq ft | Narrower pans and varied ribs for Spanish Colonial and Mediterranean profiles; historic or HOA submittals add time. |
| Tear-off and deck repair | On estimate | Removal and disposal of existing roofing plus any sheathing or framing repair found once the deck is open. |
| Travel | Included | In Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and metal replacement | Starting at $9/sq ft | Includes tear-off, haul-away, deck inspection, underlayment, flashing, and new metal panels. |
| Standing seam replacement | Starting at $12/sq ft | Concealed-fastener panels with premium finish; steeper roofs and complex hips raise the rate. |
| Stone-coated steel or metal shingle | Starting at $11/sq ft | Tile and shake profiles for Spanish Colonial or Craftsman homes; panel count drives the number. |
| Re-cover over existing shingles | Starting at $7/sq ft | New metal over one existing layer where code allows; saves tear-off cost and dumpster fees. |
| Complex or large-scale job | On estimate | Hillside access, crane lifts, multiple chimneys, and heavy deck repair need an on-site walk first. |
| Estimate | Free | Written scope and line-item pricing, response within 24 hours at (213) 325-2806. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel over existing shingles | Starting at $7/sq ft | Includes slip sheet, new eave trim, and fasteners sized for a shingle-over-deck assembly; simple roof shapes hold this rate. |
| Standing seam over existing shingles | Starting at $10/sq ft | Concealed fasteners, vented underlayment, and custom trim; pitch, roof complexity, and panel width move the number. |
| Stone-coated steel over existing shingles | Starting at $9/sq ft | Textured steel panels with underlayment and new edge trim; HOA or historic profile requirements can add design review time. |
| Deck repair or partial re-sheathing | On estimate | Soft sheathing, rot at penetrations, and skip sheathing upgrades need an on-site probe before we quote a number. |
| Travel | Included | in Los Angeles and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak or flashing repair | Starting at $450 | Covers one leak source, resealing or flashing rebuild, and a water test on the repair. |
| Screw replacement and re-fastening | Starting at $650 | Replaces backed-out screws with larger fasteners and new washers across the affected slope. |
| Panel replacement | Starting at $850 | Removes and replaces one dented or punctured panel, matches profile and color, reseals seams. |
| Complex or large-scale repair | On estimate | Multiple leaks, wet sheathing, or steep hillside access need an on-site look before pricing. |
| Travel | Included | In Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-source leak repair | Starting at $450 | Includes inspection, water test, one flashing or pipe boot repair, and photo documentation. |
| Fastener and gasket replacement (partial) | Starting at $650 | Replaces failed screws and UV-cracked washers across one roof section; access and roof pitch move the price. |
| Seam or panel section repair | Starting at $900 | Re-crimps or replaces separated standing seam sections; panel profile and color match affect material cost. |
| Emergency tarping and leak response | Starting at $550 | Same-day tarping during atmospheric-river storms, credited toward the permanent repair if booked together. |
| Complex or multi-source leak | On estimate | Hillside access, multiple penetrations or widespread gasket failure need an on-site look before a number is given. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers inspection and replacement of a limited number of failed screws and washers on an accessible roof. |
| Full-field re-fastening | Starting at $1,850 | Every fastener replaced with oversized screws and UV-resistant washers; price moves with fastener count and pitch. |
| Coastal corrosion re-seat | Starting at $1,200 | Includes corrosion treatment at the fastener line before re-seating; salt exposure near Santa Monica and Long Beach drives cost. |
| Complex or large-scale job | On estimate | Steep, tall or cut-up roofs with solar arrays and skylights need an on-site look before we quote. |
| Travel | Included | in Los Angeles and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard corrugated or R-panel install | Starting at $5.50/sq ft | Includes panels, underlayment, fasteners and basic trim on an accessible roof. |
| Premium gauge or cool-roof color | Starting at $7.00/sq ft | Heavier steel and reflective finishes add material cost but cut summer attic heat. |
| Retrofit over existing shingles | On estimate | Purlins, strapping and code limits on existing layers need an on-site look first. |
| Re-fastening and screw replacement | Starting at $450 | New screws, washers and closures on a sound existing panel roof, priced by area. |
| Travel | Included | In Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle repair (per visit) | Starting at $450 | Covers inspection, resealing and replacement of a few damaged shingles or fasteners. |
| Stamped steel shingle installation | Starting at $9/sq ft | Includes tear-off, underlayment, standard flashing and standard shake or slate profile. |
| Stone-coated steel shingle replacement | Starting at $13/sq ft | Premium stone-coated finish, full tear-off and deck repair priced separately. |
| Complex or large-scale job | On estimate | Steep pitch, hillside access, multiple skylights or historic district review need an on-site look. |
| Travel | Included | In Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel re-roof, standard gable | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, panels and standard trim on an accessible single-story roof |
| Stone-coated steel, complex or steep roof | Starting at $12/sq ft | Covers multiple valleys, dormers and steep pitches that add trim, flashing and slow the panel layout |
| Retrofit over existing shingles | Starting at $7/sq ft | Panel install over one existing layer where code allows, with new underlayment at transitions |
| Hillside or limited-access home | On estimate | Steep terrain, narrow staging or long material carries need an on-site look before we quote |
| Travel | Included | in Los Angeles and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, entry canopy) | Starting at $20/sq ft | Includes custom fabrication, underlayment and flashing; price rises with soldered seams and steep access. |
| Full copper or zinc architectural roof | Starting at $28/sq ft | Includes panels, underlayment, custom flashing and gutters; pitch, height and seam type move the number. |
| Aluminum accents and trim | Starting at $18/sq ft | Includes salt-resistant aluminum panels and trim; coastal exposure and detail count affect the rate. |
| Custom flashing, chimney caps and gutters | On estimate | Shop-fabricated metal details priced after we measure the chimney, skylights, valleys and gutter runs. |
| Travel | Included | In Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, single-story roof | Starting at $2.50/sq ft | Includes wash, spot rust treatment, seam seal, and two reflective coats on accessible single-story panels. |
| Rust conversion and full recoat | Starting at $3.25/sq ft | Adds rust converter, bare-metal primer, and fastener replacement where corrosion has reached the steel. |
| Steep or hillside access | Starting at $4.00/sq ft | Covers staging, fall protection, and slower production on two-story or canyon-side homes. |
| Color-matched premium finish | Starting at $4.50/sq ft | Custom tint and higher-grade reflective product for visible slopes on Spanish Colonial and Mediterranean homes. |
| Spot restoration only | On estimate | Localized rust treatment and coating on one slope or penetration cluster needs an on-site look first. |
| Estimate | Free | Roof inspection and written quote within 24 hours at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-detail reflash (chimney, skylight or wall) | Starting at $600 | Covers removing failed material, fabricating new flashing and sealing one detail properly. |
| Skylight curb rebuild | Starting at $950 | Unit comes out, curb flashing is replaced and the skylight is re-set on a sound curb. |
| Valley or step flashing replacement | Starting at $1,200 | Field material is lifted, new metal installed and the roof relayed over the repair. |
| Multiple details or rotted sheathing | On estimate | Scope depends on what we find under the old flashing and how much framing is damaged. |
| Travel | Included | In Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Partial snow guard layout (one or two release zones) | Starting at $1,200 | Includes roof walk, pad-style guards, seam clamps, and install over entries or walkways. |
| Full-roof pad-style snow guard system | Starting at $2,400 | Covers the full panel run; linear footage and panel profile are the main cost drivers. |
| Bar and rail system over entries and patios | Starting at $1,800 | Continuous rails on seam clamps for steep pitches; pitch and height raise the labor. |
| Eave and valley ice protection | On estimate | Heated cable and underlayment detailing priced after an on-site look at the roof. |
| Travel | Included | in Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection and photo documentation | Free | Full roof and fastener inspection with photos you can attach to an insurance claim, no obligation |
| Minor storm repair (panel re-secure, flashing reseal) | Starting at $350 | One to three panels or penetration details, priced by roof height, pitch and access difficulty |
| Screw replacement and slope re-fastening | Starting at $650 | Failed washers pulled and replaced at correct torque, priced by fastener count and slope size |
| Panel or section replacement after limb strike | On estimate | Needs on-site look for panel profile match, color availability, deck condition and staging access |
| Travel | Included | in Los Angeles and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full roof walk, fastener and seam check, photo report, and remaining service life call. |
| Pre-purchase or insurance report inspection | Starting at $250 | Written photo report formatted for buyers, sellers, or adjusters, priced by roof size and access. |
| Large or complex roof inspection | On estimate | Multi-level, steep, or hillside properties need an on-site look before we quote the scope. |
| Travel | Included | in Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum K-style gutter | Starting at $9/linear ft | Includes on-site forming, hidden hangers and one downspout; price rises with height and run length. |
| Half-round steel or copper gutter | Starting at $18/linear ft | Period profile with soldered joints and heavy hangers; material choice drives the per-foot cost. |
| Oversized downspouts and debris screens | Starting at $14/linear ft | Adds larger outlets, hoods and screens for ash and palm debris; tree load and access raise the price. |
| Custom box or fascia gutter | On estimate | Built into the roof edge for low-slope runs; needs an on-site look at framing and drainage. |
| Travel | Included | in Los Angeles and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn, shop, or carport metal roof | Free estimate | Covers inspection, panel recommendation, and a written scope with gauge and fasteners listed |
| Exposed fastener panel installation | Starting at $8.50 per sq ft | Includes tear-off of one layer, underlayment, ribbed panels, closures, and standard flashing |
| Standing seam installation | Starting at $14 per sq ft | Concealed fasteners and raised seams for churches, retail, and long-span commercial roofs |
| Repair and re-fastening | On estimate | Priced by the number of failed fasteners, penetrations, and flashing runs found on inspection |
| Travel | Included | in Los Angeles County and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (213) 325-2806, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Los Angeles need a crew that understands this basin's particular demands: relentless UV, long heat waves, Santa Ana winds that carry embers, salt air near the coast, and short but heavy winter storms. Los Angeles Metal Roofing is that local resource, a network of licensed, bonded, and insured contractors who handle metal roof installation, replacement, re-roofs, and repairs on homes from the Valley to the coast. We work on steep pitches, roofs under heavy tree cover, high-exposure hillside properties, and the large stock of aging screw-down roofs that now need attention.
From Glendale and Pasadena to Burbank and Santa Monica, our crews match the right metal system to the house, whether that is a Spanish Colonial in Silver Lake, a mid-century ranch in Sherman Oaks, or a newer stucco subdivision in Santa Clarita. If you are ready for straight answers about your roof, reach out for a free estimate and we will tell you plainly what your roof needs.
Metal roofs are durable, but they are not maintenance-free, and most leaks we see start with the fasteners. On 15 to 30 year old exposed-fastener roofs, the EPDM sealing washers under each screw dry out, shrink, and crack, letting water slip past the fastener and into the assembly. That is the number one cause of leaks on these roofs. Other common failure points include seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels after a Santa Ana event, and punctures from fallen limbs. Ignoring a small leak lets water track along purlins and decking far from the entry point, rotting sheathing and damaging insulation before you see a stain inside.
The honest call between repair and replacement depends on the roof's age, the condition of the panels, and how widespread the failures are. Often, a full screw replacement and re-fastening restores a watertight roof for a fraction of replacement cost, and we will say so when that is the right answer. When panels or seams are failing broadly, replacement may be the better long-term spend, and we will explain why without pressure.
If water is coming in now, call (213) 325-2806 to schedule a metal roof leak repair visit. We locate the actual source, not just the stain, and give you a clear scope of work before anything begins.
We install the full range of metal systems so the roof fits the house and the budget. Standing Seam Metal Roofing uses concealed clips and raised seams for a clean look and no exposed screws to maintain, which is why it carries the premium price. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops, and it needs its fasteners serviced over its life. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
Standing seam costs more up front but has no exposed screws to maintain; screw-down costs less and needs fastener service over time. Where the deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate option, and where it is not, a full tear-off and Metal Roof Replacement is the right call.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate, and the price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges because final pricing depends on the roof and site conditions, and we will not quote a number before we see the roof.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer. For a clearer picture of how projects are priced, see our pricing page, then request a free estimate or free roof inspection so we can give you a real scope and range.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ by jurisdiction. Historic district or HOA design review can also restrict panel profile and color, so plan for that early.
Requirements vary. Always verify with the Los Angeles building or planning department before starting your project. If you would like documentation for your insurer or help understanding the scope, contact us and we will walk you through what we found.
Ready to get started? Los Angeles Metal Roofing serves in Los Angeles and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806
Your Free Quote Request